In process engineering, mixing refers to the combination of substances in a single or multi-phase system. The aim is to compensate for or significantly reduce differences in concentration and/or temperature. If this condition persists, the mixing process is also called homogenization.
YTRON-Y Jet Stream Mixer
YTRON-Y Jet Stream Mixer
In process engineering, mixing refers to the combination of substances in a single or multi-phase system. The aim is to compensate for or significantly reduce differences in concentration and/or temperature. If this condition persists, the mixing process is also called homogenization. Commonly referred to as stirrers, these devices allow liquids of different viscosity levels to be mixed. There are different versions, which is why the selection depends on the desired direction of flow, the viscosity range and the task at hand.
The YTRON-Y jet mixer is suitable for a variety of tasks, including homogenization. This is due to the conversion of the movement from radial flow into axial flow. The contents of the container are mixed homogeneously and air-free in a matter of seconds due to the vertical jet. Sedimentation is prevented. The design is individual in order to achieve optimal results for the respective task.
In contrast to the YTRON-Y jet mixer, conventional agitators are not suitable for all homogenization tasks. Their direction of flow is not exclusively axial, but radially outward, which leads to the formation of two ring vortices. However, there is only limited mass transfer between these ring vortices.
Another advantage over conventional agitators is that the strong axial jet of the YTRON-Y jet mixer avoids sedimentation and vortex formation. A funnel-shaped liquid surface, which is created by the liquid rotating in the container, is called a vortex. Vortex formation leads to increased air intake, which usually has a negative effect on the product quality and the mixing process.
Immediately after switching on, the solid particles lying on the bottom of the vessel are lifted up due to the effect of the jet directed to the bottom of the container.
YTRON-Y
















